A traditional favorite Modified epoxy antifouling with an attractive, traditional bronze finish. Great for classic runabouts. 33.2% cuprous oxide provides resistance to algae, barnacles, grass and zebra mussels. Bronze color. Key features Cuprous oxide for aggressive fouling protection Modified epoxy with a hard finish, withstands season-long use Compatible over previously applied antifoulings Great protection for trailered boats Physical Data Type: Modified Epoxy/Rosin Finish: Flat Available colors: Brown Components: 1 Curing mechanism: Solvent Release Solids by weight: (Theoretical): 74% +/- 2% Solids by volume: (Theoretical): 49 +/- 2% Coverage: 400sq.ft. /gallon VOC: 440 grams/liter (Max) Active ingredients: Cuprous Oxide Flash point: 100F Application Application Method: Brush, roller, conventional spray, airless spray Number of coats:recommended: 2 Dry Film Thickness: 2 mils Wet Film Thickness: 4.1 mils Applicator: High-quality short nap roller (maximum 3/8” nap) Application temperature: Min. /Max. Range: 90 F. Min/40F. Max Thinner: Pettit 120 Brushing Thinner (Models 249953, 249961); Pettit 121 Spraying Thinner (Models 249987, 249995) Drying times (Hours) Drying @40F @70F @90F To recoat 6 hr. 4 hr. 2 hr. To launch 24 hr. 16 hr. 8 hr. *The above dry times are minimums. May be recorded after the minimum time shown.